Product highlights: DADman control with Euphonix EuCon integration: All settings for AX24 are controlled via the DADman application which can run on MAC OSX and PC XP. The PC XP version of DADman features EuCon integration, enabling the Euphonix System 5 Hybrid and the 5MC controller to control the settings of the AX24. It is possible to view the DADman control surface at the LCD screen of the System 5 Hybrid console or the 5MC controller and to to edit the various parameters. Via the EuCon integration control of the mic pre parameters like gain, delay, pad, low cut, phantom power, phase inversion, and channel mute can be made from the channel strip of the console or the controller. The control interface for the AX24 itself is RS422. A RS422 control signal can be transferred at a distance of more than 100 meters. Digital Audio Denmark can provide a variety of small USB to RS422 or Ethernet to RS422 converter boxes with between 1 and 8 RS422 outputs for controlling one or multiple AX24’s. Simply connect the RS422 converter box to your DAW computer or connect the Ethernet to RS422 converter to Ethernet. Install the driver. Then Connect AX24’s to the RS422 converter via RS422 and install the DADman/EuCon application at your DAW or at a seperate computer connected to Ethernet. If the AX24’s has to be operated together with Pyramix it is recommended to install the DADman control program on a separate computer. For other DAW applications DADman can be installed at the same computer as the DAW. Digital audio interfacing: AX24 can interface to Euphonix System 5 via AES/EBU or MADI. With a MADI I/O card mounted in the AX24’s multiply AX24’s can be daisy chained into one MADI link. One MADI link can be used for 64 channels @ 48kHz, 32 channels @ 96kHz and 16 channels @ 192kHz audio. Coax based MADI can be transferred at a distance of approx. 100 meter, and optical based MADI can be transferred at a distance of more than 1 km. For optical MADI connection between the stage and the control room two DAD HD I/O interface boxes are needed since the MADI card at the AX24 analog/digital front end is coax based MADI. The DAD HD I/O interface can also come in handy if you want to use ProTools® as your DAW since the DAD HD I/O interface features MADI to ProTools HD conversion. The internal clock circuit at AX24 is more precise than most clock devices. We therefore recommend using one of the AX24 as Word Clock master for the whole synchronization. It is possible to daisy chain the Word Clock between multiple AX24’s however if there are more than 3 AX24 units needing to be synchronized together we recommend the use of a Word Clock distribution amplifier (such as the Drawmer D-Clock) for Word Clock distribution. |
Las Vegas Pro Audio 7320 Smoke Ranch Road Suite G Las Vegas, NV 89128 Phone: 702.307.2700 fax: 702.314.2764 sales@lasvegasproaudio.com    |